热门产品：
产品分类 Products
联系我们 Contact us
安平县华耀智慧农业科技有限公司
联系人：曹女士
电话：18503185891
Q Q：3059217513
微信：hengshuihuayao
网址：www.huayaomiaochuang.com
地址：河北省衡水市安平县
新闻中心
当前位置：网站***页 > 新闻中心
安平县华耀农业设备有限公司主要生产哪些产品？
安平县华耀农业设备有限公司主要生产哪些产品？
大棚移动苗床-热镀锌移动苗床的规格：
苗床设计宽度1.4m,长度38m,高度0.75m,每跨设4组,总计24组
苗床立柱、横梁采用40×30×1.5mm的矩形管,床面四周采用铝合金边沿,网片所有材料都采用热镀锌处理。
材质:优质低碳钢丝
丝径：4.0mm /3.0mm
网孔：120 mm×25mm 130mm×30mm 50mm×50mm
尺寸：1.9m×4m
在移动苗床上面育苗，人们一般采用育苗穴盘，使用育苗盘育苗有以下几个优点：
1、种子用量少，降低生产成本。
2、整齐，保持植物种苗生长的一致性。
3、各种手动及自动播种机配套使用，便于集中管理，提高工作效率。
4、栽时不损伤根系，缓苗迅速，成活率高。
潮汐苗床框架包括端面边框，侧边框，导轮横梁，滚轮组，横梁，端面边框在潮汐式灌溉苗床框架的前后各一条，侧边框在潮汐苗床框架的左右各一条，端面边框与侧边框的端部相互连接，在端面边框之间还设置有复数条横梁，横梁的端部与前后的端面边框相连，在端面边框之间还设置有两条导轮横梁，两条导轮横梁的前后端部与前后的端面边框相连，在两条导轮横梁上安装有滚轮组。本发明采用端面边框，侧边框，端部支撑，横梁制作潮汐苗床框架，结构简单，再次苗床框架上，还设置有导轮横梁和滚轮组，实际使用时，将此框架安放在专用的苗床导轨上就可以灵活地移动。
智能温室大棚的主要任务就是是测量温度，湿度和光照强度等，并将这些信息传输到指定的监测终端。而随着农业的发展，人们对药材温室环境监测系统也提出了一些要求，就是要具备测量精度高、覆盖范围大、成本低等特点，因此现在研发的很多温室环境监测系统都是基于于无线传感器网络来开发的，这样才能够满足以上要求。
潮汐苗床框架包括端面边框，侧边框，导轮横梁，滚轮组，横梁，端面边框在潮汐式灌溉苗床框架的前后各一条，侧边框在潮汐苗床框架的左右各一条，端面边框与侧边框的端部相互连接，在端面边框之间还设置有复数条横梁，横梁的端部与前后的端面边框相连，在端面边框之间还设置有两条导轮横梁，两条导轮横梁的前后端部与前后的端面边框相连，在两条导轮横梁上安装有滚轮组。本发明采用端面边框，侧边框，端部支撑，横梁制作潮汐苗床框架，结构简单，再次苗床框架上，还设置有导轮横梁和滚轮组，实际使用时，将此框架安放在专用的苗床导轨上就可以灵活地移动。
智能温室大棚的主要任务就是是测量温度，湿度和光照强度等，并将这些信息传输到指定的监测终端。而随着农业的发展，人们对药材温室环境监测系统也提出了一些要求，就是要具备测量精度高、覆盖范围大、成本低等特点，因此现在研发的很多温室环境监测系统都是基于于无线传感器网络来开发的，这样才能够满足以上要求。
What products are the main products of Anping Huayao Agricultural Equipment Co., Ltd?
Specification for mobile bed in shed - hot dip galvanized mobile bed:
The design width of the bed is 1.4m, the length is 38m, and the height is 0.75m. Four groups are set for each span, with a total of 24 groups
The column and beam of the seedling bed are made of 40 × 30 × 1.5mm rectangular pipes, and the edge of aluminum alloy is used around the bed surface. All materials of mesh are treated by hot galvanizing.
Material: high quality low carbon steel wire
Wire diameter: 4.0mm /3.0mm
Mesh: 120 mm × 25mm 130mm × 30mm 50mm × 50mm
Size: 1.9m × 4m
In the moving bed, people generally adopt seedling tray, and the following advantages are obtained by using seedling tray
1. The seed dosage is less, and the production cost is reduced.
2. Keep the plant growth consistent.
3. All kinds of manual and automatic seeders are used together, which is convenient for centralized management and improving working efficiency.
4. The root system was not damaged during planting, and the seedling was slow and the survival rate was high.
The frame of tide seedling bed includes end frame, side frame, guide wheel beam, roller group, cross beam, and end frame are one at the front and rear of the frame of tide irrigation seedling bed, one side frame is on the left and right of the frame of tide seedling bed, the end frame and the end of side frame are connected with each other. There are also a plurality of beams between the end frames. The end of the beam is connected with the front and rear end frames, There are also two guide wheel beams between the end frames. The front and rear ends of the two guide beam are connected with the front and rear end frames, and roller groups are installed on the two guide wheel beams. The invention adopts the end frame, side frame, end support and cross beam to make the tide bed frame. The structure is simple. The frame of the seedling bed is once again set with a guide wheel beam and a roller group. When used in practice, the frame can be moved flexibly by placing the frame on a special seedling bed guide rail.
The main task of intelligent greenhouse is to measure temperature, humidity and light intensity, and transmit the information to the designated monitoring terminal. With the development of agriculture, people also put forward some requirements for the greenhouse environment monitoring system of medicinal materials. It is necessary to have the characteristics of high measurement accuracy, large coverage and low cost. Therefore, many greenhouse environment monitoring systems developed now are based on wireless sensor network, so that the above requirements can be met.
